1 / 1
120.00 SR
Regular price
144.00 SR
Sale price
Save 24.00 SR
Split into 4 payments of 30.00 SR — Interest free
Free Shipping
Over 216 AED
Over 216 AED
Free Consultation
With a Zen Hair Expert
With a Zen Hair Expert
100% Natural Hair
Guaranteed
Guaranteed
FAQs before ordering 3 quick answers — tap to view
Will the tape show through?
No — the fully matte finish does not catch the light, and at 10 mil it sits flat under lace.
Will it crease or lift at the edges?
No — the strip stretches and moves with the base, so it stays down along the whole perimeter.
Will it harm my scalp?
Made to be worn against the skin and lifts off with a remover, no tugging — patch test first and never apply it to irritated skin.
120.00 SR
×
How to apply No Shine tape: 3 steps
1
Clean and dry
Wash with a mild shampoo and dry, then wipe the scalp and the base with 99% alcohol.
2
Cut a strip and stick it down
Unroll the tape, cut a strip to the length of the bond line, and holding it by the edges, press the sticky face onto the base.
3
Peel the liner and press
Position it, peel off the printed white liner, then press along the whole perimeter with your fingertips.
The difference is clear
No Shine vs. glossy tape
No Shine
The better choice
Glossy tape
A fully matte finish, made for lace
Glossy edges catch the light and show from the front
10 mil, stretching and moving with the base
A thick strip that creases and lifts off the base
A hypoallergenic formula, gentle on sensitive skin
Can leave the skin red after long wear
Worried? Here's the honest truth
Stick it to skin, not hair
The tape grips your own hair hard, and removal will snap it — keep every strip on shaved skin or on the base itself.
Never lift it without remover
The adhesive leaves heavy residue. Wet the bond line with a dedicated remover and give it a minute — the base then lifts away with no pulling at all.
Clear off the old residue
Residue building up on the base traps sweat, irritates the skin and weakens the next bond — clear it with remover every time.
Intact skin only
Do not use on skin that is irritated, infected or highly sensitive. Patch test before first use.
Keep from children
Store the bag sealed and out of reach of children.
Still unsure? Message us on WhatsApp — we'll answer honestly before you buy.
Specifications
Safety
Hypoallergenic, gentle on sensitive skin — patch test advised before first use
Hold
Two to four weeks, varying with oil production, perspiration and daily activity
Size
A 1″ x 3 YDS roll (108 inches) — cut to the length you need
Thickness
10 mil — thin enough to sit flat under lace
Shine
Clear tape with a fully matte finish — the best choice under lace
Suits
All hair systems — lace · monofilament · poly
Stretch
A stretchy strip that moves with the base without creasing
Removal
Leaves heavy residue — needs a dedicated remover, no pulling
Form
Clear tape with a printed white liner — cut, stick, then peel the liner
Storage
Cool, dark and dry at 16–27 °C — sealed after each use, effective for up to a year
Frequently Asked Questions
Is this tape safe on skin?
›
Yes — it is made to be worn against the skin, and it lifts off with an adhesive remover rather than by pulling.
Even so, do not use it on skin that is cut, sore or irritated, and patch test a small area before the first use.
Even so, do not use it on skin that is cut, sore or irritated, and patch test a small area before the first use.
How long does the hold last?
›
Two to four weeks.
The exact figure varies from person to person with natural scalp oil, how much you perspire and how active you are.
The exact figure varies from person to person with natural scalp oil, how much you perspire and how active you are.
Does it suit lace bases?
›
Yes — that is the whole point of it. The finish is fully matte, so nothing catches the light under lace, and the 10 mil stretch moves with the base without creasing.
How do I apply it?
›
Wipe the scalp and the base with 99% alcohol and dry them.
Unroll the tape, cut a strip to the length of the bond line, and press the sticky face onto the base. Set the hairpiece in place, peel off the printed white liner, then press firmly for about 10 seconds.
Avoid swimming, heavy workouts and washing your hair for the first 24 hours while the bond cures.
Unroll the tape, cut a strip to the length of the bond line, and press the sticky face onto the base. Set the hairpiece in place, peel off the printed white liner, then press firmly for about 10 seconds.
Avoid swimming, heavy workouts and washing your hair for the first 24 hours while the bond cures.
How far does one roll go?
›
The roll is 3 YDS, which is 108 inches of tape.
Most applications take twenty to thirty inches depending on base size, so a roll lasts three to five applications, depending on base size.
Stored cool, dark and sealed, it stays effective for up to a year.
Most applications take twenty to thirty inches depending on base size, so a roll lasts three to five applications, depending on base size.
Stored cool, dark and sealed, it stays effective for up to a year.
How do I remove it?
›
With a dedicated adhesive solvent. Never pull the wig off — wet the bond line with solvent, let it work for a minute, then lift the piece away gently.
How is it different from Ultra Hold tape?
›
No Shine is the more invisible of the two: a fully matte finish at 10 mil, with a hypoallergenic formula — the better choice under lace and on sensitive skin.
Ultra Hold is the stronger: up to four weeks at 11.5 mil, and it comes as 72 pre-cut pieces with no cutting.
In short: pick No Shine for lace and sensitive skin, Ultra Hold for maximum hold and the quickest application.
Ultra Hold is the stronger: up to four weeks at 11.5 mil, and it comes as 72 pre-cut pieces with no cutting.
In short: pick No Shine for lace and sensitive skin, Ultra Hold for maximum hold and the quickest application.
Have another question?