1 / 1
135.00 SR
Regular price
162.00 SR
Sale price
Save 27.00 SR
Split into 4 payments of 33.75 SR — Interest free
Free Shipping
Over 216 AED
Over 216 AED
Free Consultation
With a Zen Hair Expert
With a Zen Hair Expert
100% Natural Hair
Guaranteed
Guaranteed
FAQs before ordering 3 quick answers — tap to view
Does it hold through sweat and the gym?
Yes — it resists water, perspiration and heat, so it holds through workouts, showers and hot weather.
Will it crease or lift at the edges?
No — the adhesive grips the whole perimeter and 11.5 mil takes the pull, so it stays down to the end of the wear.
Will it harm my scalp?
Made to be worn against the skin and lifts off with a remover, no tugging — patch test first and never apply it to irritated skin.
135.00 SR
×
How to apply Ultra Hold tape: 3 steps
1
Clean the scalp
Wipe the bonding area with 99% alcohol and let it dry completely before anything else.
2
Clean the base
Wipe old adhesive off the base and dry it fully so the new strip grips.
3
Tape and press
Cut a strip to the bond line and press it onto the base, then peel the white liner and press the whole perimeter.
The difference is clear
Ultra Hold vs. ordinary tape
Ultra Hold
The better choice
Ordinary tape
Holds over 4 weeks
Needs replacing every week or two
Resists water, perspiration and heat
Loosens with sweat and showering
11.5 mil takes daily pull and movement
A thin strip that separates at the edges
Worried? Here's the honest truth
Stick it to skin, not hair
The adhesive is stronger than your hair — any strand it touches breaks on removal. Apply every strip to shaved skin or to the base, and nowhere else.
Remove it with solvent, never by pulling
Wet the bond line with a dedicated remover and give it a minute to dissolve the adhesive, then lift the base away gently. Pulling it dry tears at your skin and at the base.
Clear off the old residue
Residue building up on the base traps sweat, irritates the skin and weakens the next bond — clear it with remover every time.
Intact skin only
Do not use on skin that is irritated, infected or highly sensitive. Patch test before first use.
Keep from children
Store the bag sealed and out of reach of children.
Still unsure? Message us on WhatsApp — we'll answer honestly before you buy.
Specifications
Safety
Skin safe — patch test advised before first use
Hold
Over 4 weeks, varying with oil production, perspiration and daily activity
Size
A 1″ x 3 YDS roll (108 inches) — cut to the length you need
Thickness
11.5 mil — a thick strip that takes daily pull and movement
Shine
Clear tape with a semi-dull finish
Suits
All hair systems — lace · monofilament · poly
Resistance
Resists water, perspiration and heat
Removal
Leaves heavy residue — needs a dedicated remover, no pulling
Form
Clear tape with a printed white liner — cut, stick, then peel the liner
Storage
Cool, dark and dry at 16–27 °C — sealed after each use, effective for up to a year
Frequently Asked Questions
Is this tape safe on skin?
›
Yes — it is skin safe and lifts off with an adhesive remover rather than by pulling.
Even so, do not use it on skin that is cut, sore or irritated, and patch test a small area before the first use.
Even so, do not use it on skin that is cut, sore or irritated, and patch test a small area before the first use.
How long does the hold last?
›
Over 4 weeks, the longest hold in our range.
The exact figure varies from person to person with natural scalp oil, how much you perspire and how active you are.
The exact figure varies from person to person with natural scalp oil, how much you perspire and how active you are.
Does it hold through sweat and showering?
›
Yes — it resists water, perspiration and heat, so it holds through the gym, the shower and hot weather. Just keep it dry for the first hour while the adhesive settles.
How do I apply it?
›
Wipe the scalp and the base with 99% alcohol and dry them.
Unroll the tape, cut a strip to the length of the bond line, and press the sticky face onto the base. Set the hairpiece in place, peel off the printed white liner, then press firmly for about 10 seconds.
Keep it dry for the first hour while the adhesive settles.
Unroll the tape, cut a strip to the length of the bond line, and press the sticky face onto the base. Set the hairpiece in place, peel off the printed white liner, then press firmly for about 10 seconds.
Keep it dry for the first hour while the adhesive settles.
How far does one roll go?
›
The roll is 3 YDS, which is 108 inches of tape.
Most applications take twenty to thirty inches depending on base size, so a roll lasts three to five applications.
Stored cool, dark and sealed, it stays effective for up to a year.
Most applications take twenty to thirty inches depending on base size, so a roll lasts three to five applications.
Stored cool, dark and sealed, it stays effective for up to a year.
How do I remove it?
›
With a dedicated adhesive solvent. Never pull the wig off — wet the bond line with solvent, let it work for a minute, then lift the piece away gently.
How is it different from No Shine tape?
›
Ultra Hold is the stronger of the two: over 4 weeks at 11.5 mil with a semi-dull finish, and it resists water and perspiration.
No Shine is the more invisible: a fully matte finish at 10 mil — the better choice under lace and on sensitive skin.
In short: pick Ultra Hold for the longest hold, No Shine for lace and sensitive skin.
No Shine is the more invisible: a fully matte finish at 10 mil — the better choice under lace and on sensitive skin.
In short: pick Ultra Hold for the longest hold, No Shine for lace and sensitive skin.
Have another question?